<?xml version="1.0" encoding="UTF-8"?>

<!-- BSD-3 Clause License

Copyright 2020 uCIFI Alliance

Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
3. Neither the name of the copyright holder nor the names of its
contributors may be used to endorse or promote products derived
from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.

-->

<LWM2M xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
	xsi:noNamespaceSchemaLocation="http://openmobilealliance.org/tech/profiles/LWM2M.xsd">
	<Object ObjectType="MODefinition">
		<Name>Outdoor lamp controller</Name>
		<Description1>The uCIFI outdoor lamp controller object provides attributes to control, command and monitor outdoor luminaires in streets, in tunnels, on roads and for illumination of park and gardens.</Description1>
		<ObjectID>3416</ObjectID>
		<ObjectURN>urn:oma:lwm2m:ext:3416</ObjectURN>
		<LWM2MVersion>1.0</LWM2MVersion>
		<ObjectVersion>1.0</ObjectVersion>
		<MultipleInstances>Multiple</MultipleInstances>
		<Mandatory>Optional</Mandatory>
		<Resources>
			<Item ID="1">
				<Name>Command</Name>
				<Operations>RW</Operations>
				<MultipleInstances>Single</MultipleInstances>
				<Mandatory>Mandatory</Mandatory>
				<Type>Integer</Type>
				<RangeEnumeration>0..100</RangeEnumeration>
				<Units>/100</Units>
				<Description>Command (e.g. manual override, scheduler) sent to the outdoor lamp controller.</Description>
			</Item>
			<Item ID="2">
				<Name>Command in action</Name>
				<Operations>R</Operations>
				<MultipleInstances>Single</MultipleInstances>
				<Mandatory>Optional</Mandatory>
				<Type>Integer</Type>
				<RangeEnumeration>0..100</RangeEnumeration>
				<Units>/100</Units>
				<Description>For outdoor lighting applications, the command in action (this resource) may differ from a command that was sent (resource ID: 1), due to LPWAN network constraints and/or light adjustments within the lamp’s control gear (e.g. virtual power settings). The command in action is the actual value of the command in action in the outdoor lamp controller.</Description>
			</Item>
			<Item ID="3">
				<Name>Dimming level</Name>
				<Operations>R</Operations>
				<MultipleInstances>Single</MultipleInstances>
				<Mandatory>Mandatory</Mandatory>
				<Type>Integer</Type>
				<RangeEnumeration>0..100</RangeEnumeration>
				<Units>/100</Units>
				<Description>Dimming level (0 for OFF and 100% for ON) measured on the outdoor lamp controller.</Description>
			</Item>
			<Item ID="4">
				<Name>Default dimming level</Name>
				<Operations>RW</Operations>
				<MultipleInstances>Single</MultipleInstances>
				<Mandatory>Optional</Mandatory>
				<Type>Integer</Type>
				<RangeEnumeration>0..100</RangeEnumeration>
				<Units>/100</Units>
				<Description>The default dimming level that the outdoor lamp controller applies when the device is powered ON.</Description>
			</Item>
			<Item ID="5">
				<Name>Lamp failure</Name>
				<Operations>R</Operations>
				<MultipleInstances>Single</MultipleInstances>
				<Mandatory>Optional</Mandatory>
				<Type>Boolean</Type>
				<RangeEnumeration></RangeEnumeration>
				<Units></Units>
				<Description>Set to True if the outdoor lamp controller detects that the lamp is not producing light while it is expected to (e.g. the lamp is broken).</Description>
			</Item>
			<Item ID="6">
				<Name>Lamp failure reason</Name>
				<Operations>R</Operations>
				<MultipleInstances>Single</MultipleInstances>
				<Mandatory>Optional</Mandatory>
				<Type>Integer</Type>
				<RangeEnumeration></RangeEnumeration>
				<Units></Units>
				<Description>Description of the reason why the lamp failed (e.g. low power on a LED engine, no consumption detected while relay closed).</Description>
			</Item>
			<Item ID="7">
				<Name>Control gear failure</Name>
				<Operations>R</Operations>
				<MultipleInstances>Single</MultipleInstances>
				<Mandatory>Optional</Mandatory>
				<Type>Boolean</Type>
				<RangeEnumeration></RangeEnumeration>
				<Units></Units>
				<Description>Set to True in case the control gear has a failure. Outdoor lamp controllers may read the control gear failure from a DALI bus or by analyzing a 0-10 volts interface to the control gear.</Description>
			</Item>
			<Item ID="8">
				<Name>Control gear failure reason</Name>
				<Operations>R</Operations>
				<MultipleInstances>Single</MultipleInstances>
				<Mandatory>Optional</Mandatory>
				<Type>Integer</Type>
				<RangeEnumeration></RangeEnumeration>
				<Units></Units>
				<Description>Description of the reason why the control gear failed. You may refer to the DiiA list of possible control gear failures.</Description>
			</Item>
			<Item ID="9">
				<Name>Relay failure</Name>
				<Operations>R</Operations>
				<MultipleInstances>Single</MultipleInstances>
				<Mandatory>Optional</Mandatory>
				<Type>Boolean</Type>
				<RangeEnumeration></RangeEnumeration>
				<Units></Units>
				<Description>Set to True if the outdoor lamp controller detects that its relay is not operating as it is expected to.</Description>
			</Item>
			<Item ID="10">
				<Name>Day burner</Name>
				<Operations>R</Operations>
				<MultipleInstances>Single</MultipleInstances>
				<Mandatory>Optional</Mandatory>
				<Type>Boolean</Type>
				<RangeEnumeration></RangeEnumeration>
				<Units></Units>
				<Description>Set to True in case the lamp is ON while it should be OFF (e.g. day burner).</Description>
			</Item>
			<Item ID="11">
				<Name>Cycling failure</Name>
				<Operations>R</Operations>
				<MultipleInstances>Single</MultipleInstances>
				<Mandatory>Optional</Mandatory>
				<Type>Boolean</Type>
				<RangeEnumeration></RangeEnumeration>
				<Units></Units>
				<Description>Set to True if the outdoor lamp controller detects that the lamp is switching ON and OFF too often.</Description>
			</Item>
			<Item ID="12">
				<Name>Control gear communication failure</Name>
				<Operations>R</Operations>
				<MultipleInstances>Single</MultipleInstances>
				<Mandatory>Optional</Mandatory>
				<Type>Boolean</Type>
				<RangeEnumeration></RangeEnumeration>
				<Units></Units>
				<Description>Set to True in case the control gear (e.g. LED driver) does not answer on the DALI bus.</Description>
			</Item>
			<Item ID="13">
				<Name>Scheduler ID</Name>
				<Operations>RW</Operations>
				<MultipleInstances>Multiple</MultipleInstances>
				<Mandatory>Optional</Mandatory>
				<Type>Integer</Type>
				<RangeEnumeration></RangeEnumeration>
				<Units></Units>
				<Description>Identifier(s) of the scheduler(s) that are assigned to the Command of this outdoor lamp controller.</Description>
			</Item>
			<Item ID="14">
				<Name>Invalid scheduler</Name>
				<Operations>R</Operations>
				<MultipleInstances>Single</MultipleInstances>
				<Mandatory>Optional</Mandatory>
				<Type>Boolean</Type>
				<RangeEnumeration></RangeEnumeration>
				<Units></Units>
				<Description>Set to True when one of the schedulers can’t be executed or is not supported by the outdoor lamp controller. Otherwise set to False.</Description>
			</Item>
			<Item ID="15">
				<Name>Lamp operating hours</Name>
				<Operations>R</Operations>
				<MultipleInstances>Single</MultipleInstances>
				<Mandatory>Optional</Mandatory>
				<Type>Integer</Type>
				<RangeEnumeration></RangeEnumeration>
				<Units>h</Units>
				<Description>Cumulated number of hours during which the lamp has been ON with a strictly positive dimming level.</Description>
			</Item>
			<Item ID="16">
				<Name>Lamp operating hours reset</Name>
				<Operations>E</Operations>
				<MultipleInstances>Single</MultipleInstances>
				<Mandatory>Optional</Mandatory>
				<Type></Type>
				<RangeEnumeration></RangeEnumeration>
				<Units></Units>
				<Description>Reset of the lamp operating hours counter.</Description>
			</Item>
			<Item ID="17">
				<Name>Lamp ON timestamp</Name>
				<Operations>R</Operations>
				<MultipleInstances>Single</MultipleInstances>
				<Mandatory>Optional</Mandatory>
				<Type>Time</Type>
				<RangeEnumeration></RangeEnumeration>
				<Units></Units>
				<Description>Last date and time at which the lamp switched ON, i.e. from no light to light (e.g. power off to power on and/or dim level = 0 to dim level > 0).</Description>
			</Item>
			<Item ID="18">
				<Name>Lamp switch counter</Name>
				<Operations>R</Operations>
				<MultipleInstances>Single</MultipleInstances>
				<Mandatory>Optional</Mandatory>
				<Type>Integer</Type>
				<RangeEnumeration></RangeEnumeration>
				<Units></Units>
				<Description>Number of times the lamp was switched from ON to OFF since the last lamp switch counter reset.</Description>
			</Item>
			<Item ID="19">
				<Name>Lamp switch counter reset</Name>
				<Operations>E</Operations>
				<MultipleInstances>Single</MultipleInstances>
				<Mandatory>Optional</Mandatory>
				<Type></Type>
				<RangeEnumeration></RangeEnumeration>
				<Units></Units>
				<Description>Reset the lamp switch counter.</Description>
			</Item>
			<Item ID="20">
				<Name>Control gear start counter</Name>
				<Operations>R</Operations>
				<MultipleInstances>Single</MultipleInstances>
				<Mandatory>Optional</Mandatory>
				<Type>Integer</Type>
				<RangeEnumeration></RangeEnumeration>
				<Units></Units>
				<Description>Number of times the control gear was switched from ON to OFF.</Description>
			</Item>
			<Item ID="21">
				<Name>Control gear temperature</Name>
				<Operations>R</Operations>
				<MultipleInstances>Single</MultipleInstances>
				<Mandatory>Optional</Mandatory>
				<Type>Float</Type>
				<RangeEnumeration></RangeEnumeration>
				<Units>Cel</Units>
				<Description>Temperature measured by the control gear and transmitted to the device through DALI, Zhaga D4i or equivalent.</Description>
			</Item>
			<Item ID="22">
				<Name>Control gear thermal derating</Name>
				<Operations>R</Operations>
				<MultipleInstances>Single</MultipleInstances>
				<Mandatory>Optional</Mandatory>
				<Type>Boolean</Type>
				<RangeEnumeration></RangeEnumeration>
				<Units></Units>
				<Description>Set to True if the control gear has derated the light source due to high temperature.</Description>
			</Item>
			<Item ID="23">
				<Name>Control gear thermal derating counter</Name>
				<Operations>R</Operations>
				<MultipleInstances>Single</MultipleInstances>
				<Mandatory>Optional</Mandatory>
				<Type>Integer</Type>
				<RangeEnumeration></RangeEnumeration>
				<Units></Units>
				<Description>Number of time the control gear has derated the light source due to a high temperature, since last counter reset.</Description>
			</Item>
			<Item ID="24">
				<Name>Control gear thermal derating counter reset</Name>
				<Operations>E</Operations>
				<MultipleInstances>Single</MultipleInstances>
				<Mandatory>Optional</Mandatory>
				<Type></Type>
				<RangeEnumeration></RangeEnumeration>
				<Units></Units>
				<Description>Reset of the control gear thermal derating counter.</Description>
			</Item>
			<Item ID="25">
				<Name>Control gear thermal shutdown</Name>
				<Operations>R</Operations>
				<MultipleInstances>Single</MultipleInstances>
				<Mandatory>Optional</Mandatory>
				<Type>Boolean</Type>
				<RangeEnumeration></RangeEnumeration>
				<Units></Units>
				<Description>Set to True if the control gear has shut the light source down due to high temperature.</Description>
			</Item>
			<Item ID="26">
				<Name>Control gear thermal shutdown counter</Name>
				<Operations>R</Operations>
				<MultipleInstances>Single</MultipleInstances>
				<Mandatory>Optional</Mandatory>
				<Type>Integer</Type>
				<RangeEnumeration></RangeEnumeration>
				<Units></Units>
				<Description>Number of times the control gear has shutdown the light source since last counter reset.</Description>
			</Item>
			<Item ID="27">
				<Name>Control gear thermal derating counter reset</Name>
				<Operations>E</Operations>
				<MultipleInstances>Single</MultipleInstances>
				<Mandatory>Optional</Mandatory>
				<Type></Type>
				<RangeEnumeration></RangeEnumeration>
				<Units></Units>
				<Description>Reset of the control gear shutdown counter.</Description>
			</Item>
			<Item ID="28">
				<Name>Output port</Name>
				<Operations>RW</Operations>
				<MultipleInstances>Single</MultipleInstances>
				<Mandatory>Optional</Mandatory>
				<Type>Integer</Type>
				<RangeEnumeration></RangeEnumeration>
				<Units></Units>
				<Description>Address or reference of the output port (e.g. DALI port address or 1-10 volt output) in case of multiple control gears.</Description>
			</Item>
			<Item ID="29">
				<Name>Standby mode</Name>
				<Operations>RW</Operations>
				<MultipleInstances>Single</MultipleInstances>
				<Mandatory>Optional</Mandatory>
				<Type>Boolean</Type>
				<RangeEnumeration></RangeEnumeration>
				<Units></Units>
				<Description>Set to True if the outdoor lamp controller should keep its relay closed (control gear is powered ON) when command and/or dimming level is equal to 0. Set to False if the outdoor lamp controller should open its relay (control gear is not powered ON) when command and/or dimming level is equal to 0.</Description>
			</Item>
			<Item ID="30">
				<Name>Constant light output</Name>
				<Operations>RW</Operations>
				<MultipleInstances>Single</MultipleInstances>
				<Mandatory>Optional</Mandatory>
				<Type>Boolean</Type>
				<RangeEnumeration></RangeEnumeration>
				<Units></Units>
				<Description>Set to True to activate Constant Light Output dimming correction on the outdoor lamp controller. Set to False to deactivate Constant Light Output.</Description>
			</Item>
			<Item ID="31">
				<Name>Cleaning factor enabled</Name>
				<Operations>RW</Operations>
				<MultipleInstances>Single</MultipleInstances>
				<Mandatory>Optional</Mandatory>
				<Type>Boolean</Type>
				<RangeEnumeration></RangeEnumeration>
				<Units></Units>
				<Description>Light output of a luminaire may depend on the lamp cleaning factor. Cleaning factor may be used as a light output compensation. Set to True to activate lamp cleaning correction on the outdoor lamp controller. Set to False to deactivate the lamp cleaning correction.</Description>
			</Item>
			<Item ID="32">
				<Name>Cleaning period</Name>
				<Operations>RW</Operations>
				<MultipleInstances>Single</MultipleInstances>
				<Mandatory>Optional</Mandatory>
				<Type>Integer</Type>
				<RangeEnumeration></RangeEnumeration>
				<Units></Units>
				<Description>Number of days after which cleaning factor is back to 100%.</Description>
			</Item>
			<Item ID="33">
				<Name>Initial lamp cleaning factor</Name>
				<Operations>RW</Operations>
				<MultipleInstances>Single</MultipleInstances>
				<Mandatory>Optional</Mandatory>
				<Type>Integer</Type>
				<RangeEnumeration>0..100</RangeEnumeration>
				<Units>/100</Units>
				<Description>Initial lamp cleaning correction factor to multiply to the command when the luminaire is cleaned, at the lamp cleaning date.</Description>
			</Item>
			<Item ID="34">
				<Name>Lamp cleaning date</Name>
				<Operations>RW</Operations>
				<MultipleInstances>Single</MultipleInstances>
				<Mandatory>Optional</Mandatory>
				<Type>Time</Type>
				<RangeEnumeration></RangeEnumeration>
				<Units></Units>
				<Description>Date at which the luminaire was last (or will be next) cleaned and the lamp cleaning factor should be set to the initial lamp cleaning factor.</Description>
			</Item>
			<Item ID="35">
				<Name>Control type</Name>
				<Operations>RW</Operations>
				<MultipleInstances>Single</MultipleInstances>
				<Mandatory>Optional</Mandatory>
				<Type>Integer</Type>
				<RangeEnumeration>0..13</RangeEnumeration>
				<Units></Units>
				<Description>Type of control system with whioch the outdoor lamp controller switches, dims and monitors the lamp. The possible control types are: 0: No dimming control, 1 : DALI part 201 - Device Type 0, 2 : DALI part 202 - Device Type 1, 3 : DALI part 203 - Device Type 2, 4 : DALI part 204 - Device Type 3, 5 : DALI part 205 - Device Type 4, 6 : DALI part 206 - Device Type 5, 7 : DALI part 207 - Device Type 6, 8 : DALI part 208 - Device Type 7, 9 : DALI part 209 - Device Type 8, 10 : 0-10V, 11 : PWM, 12 : PWM_N, 13 : Other</Description>
			</Item>
			<Item ID="36">
				<Name>Nominal Lamp wattage</Name>
				<Operations>RW</Operations>
				<MultipleInstances>Single</MultipleInstances>
				<Mandatory>Optional</Mandatory>
				<Type>Integer</Type>
				<RangeEnumeration></RangeEnumeration>
				<Units>W</Units>
				<Description>Active power of the light source at 100% dimming level.</Description>
			</Item>
			<Item ID="37">
				<Name>Minimum dimming level</Name>
				<Operations>RW</Operations>
				<MultipleInstances>Single</MultipleInstances>
				<Mandatory>Optional</Mandatory>
				<Type>Integer</Type>
				<RangeEnumeration></RangeEnumeration>
				<Units>/100</Units>
				<Description>Minimum dimming level under which the lamp will most probably not operate.</Description>
			</Item>
			<Item ID="38">
				<Name>Minimum lamp wattage</Name>
				<Operations>RW</Operations>
				<MultipleInstances>Single</MultipleInstances>
				<Mandatory>Optional</Mandatory>
				<Type>Integer</Type>
				<RangeEnumeration></RangeEnumeration>
				<Units>W</Units>
				<Description>Expected active power of the light source at its minimum dimming level. This value may be used to detect failure at low dimming level.</Description>
			</Item>
			<Item ID="39">
				<Name>Light color temperature command</Name>
				<Operations>RW</Operations>
				<MultipleInstances>Single</MultipleInstances>
				<Mandatory>Optional</Mandatory>
				<Type>String</Type>
				<RangeEnumeration></RangeEnumeration>
				<Units>K</Units>
				<Description>Latest light color temperature command sent to the lamp actuator.</Description>
			</Item>
			<Item ID="40">
				<Name>Actual light color temperature</Name>
				<Operations>R</Operations>
				<MultipleInstances>Single</MultipleInstances>
				<Mandatory>Optional</Mandatory>
				<Type>String</Type>
				<RangeEnumeration></RangeEnumeration>
				<Units>K</Units>
				<Description>The actual light color temperature of the light source.</Description>
			</Item>
			<Item ID="41">
				<Name>Virtual power output</Name>
				<Operations>RW</Operations>
				<MultipleInstances>Single</MultipleInstances>
				<Mandatory>Optional</Mandatory>
				<Type>Integer</Type>
				<RangeEnumeration>0..100</RangeEnumeration>
				<Units>/100</Units>
				<Description>Percentage of nominal power at which the light source should be set when the Command is set to 100%.</Description>
			</Item>
			<Item ID="42">
				<Name>Voltage at max dim level</Name>
				<Operations>RW</Operations>
				<MultipleInstances>Single</MultipleInstances>
				<Mandatory>Optional</Mandatory>
				<Type>Float</Type>
				<RangeEnumeration></RangeEnumeration>
				<Units>V</Units>
				<Description>Voltage level on the control port that corresponds to maximum dimming level. This applies only if Control Type = 0-10V.</Description>
			</Item>
			<Item ID="43">
				<Name>Voltage at min dim level</Name>
				<Operations>RW</Operations>
				<MultipleInstances>Single</MultipleInstances>
				<Mandatory>Optional</Mandatory>
				<Type>Float</Type>
				<RangeEnumeration></RangeEnumeration>
				<Units>V</Units>
				<Description>Voltage level on the control port that corresponds to minimum dimming level. This applies only if Control Type = 0-10V.</Description>
			</Item>
			<Item ID="44">
				<Name>Light source voltage</Name>
				<Operations>R</Operations>
				<MultipleInstances>Single</MultipleInstances>
				<Mandatory>Optional</Mandatory>
				<Type>Float</Type>
				<RangeEnumeration></RangeEnumeration>
				<Units>V</Units>
				<Description>Voltage (usually DC voltage) to the light source or generic load, measured at the output of the control gear.</Description>
			</Item>
			<Item ID="45">
				<Name>Light source current</Name>
				<Operations>R</Operations>
				<MultipleInstances>Single</MultipleInstances>
				<Mandatory>Optional</Mandatory>
				<Type>Float</Type>
				<RangeEnumeration></RangeEnumeration>
				<Units>A</Units>
				<Description>Current (usually DC current) delivered by the control gear to the light source or generic load, measured at the output of the control gear.</Description>
			</Item>
			<Item ID="46">
				<Name>Light source active power</Name>
				<Operations>R</Operations>
				<MultipleInstances>Single</MultipleInstances>
				<Mandatory>Optional</Mandatory>
				<Type>Float</Type>
				<RangeEnumeration></RangeEnumeration>
				<Units>W</Units>
				<Description>Active power of the light source or generic load, measured at the output of the control gear.</Description>
			</Item>
			<Item ID="47">
				<Name>Light source active energy</Name>
				<Operations>R</Operations>
				<MultipleInstances>Single</MultipleInstances>
				<Mandatory>Optional</Mandatory>
				<Type>Float</Type>
				<RangeEnumeration></RangeEnumeration>
				<Units>kWh</Units>
				<Description>Cumulated active energy consumption of the light source or generic load, measured at the output of the control gear.</Description>
			</Item>
		</Resources>
		<Description2></Description2>
	</Object>
</LWM2M>